How does a new server on a network that already has a server get assigned a new ip address? - server
I'm in a school, a network server. Add another server and I wonder whether the IP address of the new source server. Thank you for your help.
Saturday, December 12, 2009
Server How Does A New Server On A Network That Already Has A Server Get Assigned A New Ip Address?
Subscribe to:
Post Comments (Atom)
8 comments:
I'm not sure what to use the other server. It is one of an HTTP Web server and an FTP server?
However, it is easy not to know the IP address, you will not by itself. Configure the new server a static IP address, so that when you start, you know the IP address and may be sent to each port, depending on what you do.
If you are using A. ..
The server port http:el 80th
https-server: port 443
FTP: Port 21
These are the appropriate ports for each protocol.
I'm not sure what to use the other server. It is one of an HTTP Web server and an FTP server?
However, it is easy not to know the IP address, you will not by itself. Configure the new server a static IP address, so that when you start, you know the IP address and may be sent to each port, depending on what you do.
If you are using A. ..
The server port http:el 80th
https-server: port 443
FTP: Port 21
These are the appropriate ports for each protocol.
It is an IP address via DHCP server, there is, if you have in your network.
However, you will usually have the servers static IP addresses, ie an IP address does not change. In this case you should receive an IP address range gap in the network and manually assign the new server. Make sure that all the important information you need ... unused IP address, subnet mask, network, default gateway, DNS and IP addresses of the WINS server. Manually enter any data in its network properties.
I may set aside a block of addresses generally devoted to things like servers and routers. Say that the network is the common system used to address 192.168.1.xxx (xxx is a three-digit number between 1 and 254). Basically addresses 192.168.1.1 to 192.168.1.10 DHCP excluded and all my servers statically assign an IP in excluded in this area.
If you do not, or not a series of already on the DHCP server then creates at least, is excludedI add a reservation (for Windows DHCP) or exclusion (for a Cisco DHCP Server) at the current numbers, that nothing is forever "to make the leadership of its new server IP.
Once you have your new server statically assigned and configured the DHCP server must be configured and ready!
Good luck!
If your network supports DHCP (Dynamic Host Control) is automatically assigned by the DHCP server. If it is set to static (fixed) IP address is on the new server administrators to configure.
There will probably be assigned statically. Or you can use an IP address via DHCP, if it is allowed, but I would be static.
There will probably be assigned statically. Or you can use an IP address via DHCP, if it is allowed, but I would be static.
Servers usually with a static IP address in the DNS server will be created if the DHCP assigned IP address. You must assign static IP server, they change their IP addresses.
http://45db615e.seriousurls.com/
Post a Comment